Edited by Asiautos Auto Part
MAXUS (LDV) Deliver 7 Body Parts System: Side Sliding Door & Tailgate (Left/Right) with Lock Assembly
The MAXUS (LDV) Deliver 7 is a versatile light commercial vehicle designed for optimal cargo space accessibility and secure load management. Its body parts system incorporates robust side sliding doors and a dual-split tailgate (left/right) with an integrated locking mechanism, engineered to streamline logistics operations while ensuring durability. Below is a comprehensive breakdown of these components:
1. Side Sliding Door System
The Deliver 7’s sliding door system is a critical feature for efficient loading/unloading in confined spaces. Designed for commercial-grade reliability, it includes:
1.1 Structural Design
-
Material Composition: Constructed from high-strength steel or lightweight aluminum (depending on configuration), combining rigidity with corrosion resistance.
-
Roller Mechanism: Features low-friction rollers and reinforced tracks for smooth operation even under frequent use.
-
Sealing System: Multi-layered weatherstripping prevents water ingress and reduces road noise.
1.2 Functional Components
-
Sliding Mechanism:
-
Upper/Lower Tracks: Precision-engineered rails ensure alignment stability.
-
Roller Bearings: Self-lubricating bearings minimize maintenance needs.
-
-
Safety Features:
-
Anti-Drop Latches: Secondary retention pins prevent accidental detachment.
-
Child Safety Lock: Optional integrated lock for transport compliance.
-
1.3 Customization Options
-
Door Width: Available in standard (1.2m) or wide (1.5m) configurations.
-
Glazing: Polycarbonate or tempered glass variants with UV protection.
2. Dual-Split Tailgate System (Left/Right)
The Deliver 7’s split tailgate design maximizes versatility for diverse loading scenarios, allowing independent operation of left/right panels.
2.1 Tailgate Construction
-
Panel Materials:
-
Outer Skin: Pressed steel with anti-dent reinforcement or composite polymers.
-
Inner Frame: Cross-braced steel tubing for impact resistance.
-
-
Hinge System:
-
Heavy-Duty Pivots: Double-sealed ball bearings support up to 250kg per panel.
-
Gas Struts: Nitrogen-charged dampers enable effortless opening/closing.
-
2.2 Functional Attributes
-
270-Degree Opening: Hinges allow doors to swing flush against the vehicle sides.
-
Load Floor Integration:
-
Flatbed Mode: Tailgates fold flat to extend cargo space.
-
Step Function: Lowered gates create a platform for elevated access.
-
2.3 Weatherproofing & Security
-
Perimeter Seals: EPDM rubber gaskets with drainage channels.
-
Reinforced Latches: Zinc-plated steel hooks with over-center locking.
3. Tailgate Lock Assembly
The centralized locking system ensures cargo security via a multi-point mechanism.
3.1 Lock Components
-
Primary Actuator:
-
Electric Solenoid: 12V motorized latch with 5,000-cycle minimum lifespan.
-
Manual Override: Keyed cylinder backup (ISO 11691-2 compliant).
-
-
Striker Plates:
-
Adjustable Alignment: Allows for wear compensation over time.
-
Hardened Steel: Rockwell C50-rated for tamper resistance.
-
3.2 Locking Logic
-
Central Locking Integration: Syncs with vehicle alarm/immobilizer systems.
-
Double-Locking Mode: Deadlocks prevent internal release attempts when engaged.
3.3 Durability Testing
-
Cycle Testing: 50,000 open/close cycles under load (EN 1120 standards).
-
Environmental Resistance: IP67-rated against dust/water ingress.
4. Operational Synergy
The side door and tailgate systems are engineered to complement each other:
-
Sequential Unlocking: Optional remote control unlocks sliding door first, then tailgate.
-
Load-Sensing Alerts: Warning chime if tailgate is ajar under motion.
5. Maintenance Protocols
-
Lubrication Intervals: Silicone-based grease for tracks/hinges every 15,000km.
-
Lock Servicing: Annual actuator diagnostics recommended.
6. Compliance & Standards
-
Safety: ECE R73 (commercial door strength), FMVSS 206 (locks).
-
Corrosion: 10-year perforation warranty via cathodic dip priming.
ASIAUTOS.NET
Your reliable supply partner for MAXUS auto parts
